USB To RS-232/422/485 Isolation Converter

USB To RS-232/422/485 Isolation Converter

• FTDI FT-232R USB chip

• Plug & Play installation

• 3000V DC isolation protection

• Built in 15KV ESD protection for signals

• RS-422/485 surge & over current protection

• Built in 100 ohm Termination resistor

• Windows, MAC OS, Linux driver support

• Attach with one USB cable type A to type B

Serial Interface 1 port

Port Type : RS-232 x 1 Port ( DB9 ) or RS-422/485 x 1 Port (4-pin Terminal Block, Auto Select)

Connector : Male DB9 / 4-pin Terminal Block

RS-232 Speed : 300 bps ~ 921.6 Kbps

RS-422/485 Speed 300 bps ~ 230.4 Kbps

Parity : None , Odd , Even , Mark , Space

Data Bit : 7 , 8

Stop Bit : 1 , 2

RS-232 : Rx , Tx , GND , RTS , CTS , DTR , DSR ,

RS-422 : Rx+ , Rx- , Tx+ , Tx-

RS-485 : Data+ , Data-

Built–in : RS-422/485 pull high / low Resistor

Protection : 422/485 Surge & Over Current Protection

Built in 15KV ESD protection for all signals

Isolation : 3000V DC Optical isolation protection

Termination Built in 100 Ohm Termination resistor

Resistor switch On/Off

Distance : Up to 1250m

Driver Support

Windows 98SE/2000/XP/2003/Server/VISTA/WIN 7/

WIN 8 / XP Embedded/WinCE 4.2/5.0/6.0

MAC OS OSX / OS9

Linux 2.4 / 2.6

USB Interface

Chipset : FTDI FT-232R

USB spec : USB 1.0, 1.1, 2.0

Connector : USB Type B

Baud Rates : Full speed 12Mbps

Regulatory Approval

FCC Part15 Class A

CE EN55022 Class A, EN55024

RoHS Compliance

Warranty 1 Year

Environment

Temperature : Operating: 0°C ~ 65°C (32°F ~ 149°F)

Storage: -20°C ~ 70°C (-4°F ~ 158°F)

Humidity : Operating: 10% ~ 95% non-condensing

Storage: 5% ~ 95% non-condensing

Power

Input: USB Bus power, DC5V, 50mA

Dimension & Weight

Dimension 85 x 80 x 28 mm

Weight 90g

LED SYS (PWR), Rx, Tx

Product Image:

click above photo to get large view.

Data Sheet:

US-201-I_DataSheet.pdf

User's Manual:

US-201-I_UsersManual.pdf

Drivers:

upon request.