Serial RS-232 To RS-422/485+Isolation Converter

• Plug & Play installation

• 3000V DC isolation protection

• Built in 15KV ESD protection for signals

• RS-422/485 surge & over current protection

• Built in 100 ohm Termination resistor

• Dual modes power input: DC jack / Screw terminal

Serial Interface

Port Type : 1x RS-232 Port (DB9) to 1x RS-422/485 Port (4-pin Terminal Block, auto select)

Connector : Male DB9 / 4-pin Terminal Block

Speed : 300 bps ~ 230.4 Kbps

Parity : None , Odd , Even , Mark , Space

Data Bit : 5, 6 , 7 , 8

Stop Bit : 1 , 2

RS-232 : Rx , Tx , GND

(RTS & CTS is shorted), (DTR, DSR & DCD are shorted)

RS-422 : Rx+ , Rx- , Tx+ , Tx-

RS-485 : Data+ , Data-

Built–in : RS-422/485 pull high / low Resistor

Protection : 422/485 Surge & Over Current Protection

Built in 15KV ESD protection for all signals

Isolation : 3000V DC Optical isolation protection

Termination Resistor: Built in 100 Ohm Termination resistor switch On/Off

Distance : Up to 1250 Meters

Power Supply

Input: DC 9 ~ 24V, 150mA@ 12VDC

Dual modes: 2-pin screw terminal & DC jack adapter

Consumption <2W

Protection: Wrong polarity input protection

LED   SYS (PWR), Rx, Tx

Regulatory Approval

FCC Part15 Class A

CE EN55022 Class A, EN55024

RoHS Compliance

Environment

Temperature : Operating: 0°C ~ 65°C (32°F ~ 149°F)

Storage: -20°C ~ 70°C (-4°F ~ 158°F)

Humidity : Operating: 10% ~ 95% non-condensing

Storage: 5% ~ 95% non-condensing

Dimension & Weight

Dimension 110x90x26 mm

Weight 95g

Warranty1 Year

Product Image:

click above photo to get large view.

Data Sheet:

SC-101-I_DataSheet_201910a.pdf

User's Manual:

SC-101-I_User_Manual_201806a.pdf

Drivers:

upon request.