Serial RS-232 To RS-422/485 Converter

• Plug & Play installation

• Built in 15KV ESD protection for signals

• RS-422/485 surge protection

• Built in 100 ohm Termination resistor

• LED indicator for transmission status

Serial Interface 1 port

Port Type : 1x RS-232 Port (DB9)  to 1x RS-422/485 Port (4-pin Terminal Block)

Connector : Male DB9 / 4-pin Terminal Block

Speed : 300 bps ~ 230.4 Kbps

Parity : None , Odd , Even , Mark , Space

Data Bit : 5, 6 , 7 , 8

Stop Bit : 1 , 2

RS-232 : Rx , Tx , GND 

(RTS & CTS is shorted, DTR, DSR & DCD are shorted)

RS-422 : Rx+ , Rx- , Tx+ , Tx-

RS-485 : Data+ , Data-

Built–in : RS-422/485 pull high / low Resistor

Protection : 422/485 Surge Protection

Built in 15KV ESD protection for all signals

Termination Resistor built in 100 Ohm Termination resistor switch On/Off

Distance : Up to 1250 Meters.

Power Supply

Input: DC 5V, 20mA@ 12VDC

Mode: DC jack adapter

Wrong polarity input protection

LED  Rx, Tx

Regulatory Approval

FCC Part15 Class A

CE EN55022 Class A, EN55024

RoHS Compliance

Environment

Temperature : Operating: 0°C ~ 65°C (32°F ~ 149°F)

Storage: -20°C ~ 70°C (-4°F ~ 158°F)

Humidity : Operating: 10% ~ 95% non-condensing

Storage: 5% ~ 95% non-condensing

Dimension & Weight

Dimension 55 x 40 x 25 mm

Weight 35g

Warranty 1 Year

Product Image:

click above photo to get large view.

Data Sheet:

SC-101_DataSheet_201810a.pdf

User's Manual:

SC-101_User_Manual_201808a.pdf

Drivers:

upon request.